Welcome to MKS Motorsport

At MKS Motorsport I pride myself in producing quality, lasting parts to the starquest community. I bought my first Starion in 2007 and have owned it ever since. I’ve been in the Starion community for 13 years now. Thank you all for your support.

Products

SUSPENSION BUSHINGS
$265 shipped – (Within USA, International available upon request, contact me.)

Full suspension bushing set. This covers your front control arms, front tension rods, rear control arms, and subframe bushings. Pair it with the sway bar bushings (not included) and you’re all up to date! (Must reuse some steel sleeves from stock bushings)


G54B ENGINE MOUNTS
$135 shipped – (Within USA, International available upon request, contact me.)

Stock replacement engine mounts. Get rid of those old worn out rubber mounts! These are more rigid than stock and more durable. (May notice a small increase in vibration from the engine)


DIFFERENTIAL MOUNTS
$135 shipped – (Within USA, International available upon request, contact me.)

These are stock replacement differential mounts. Add more righty to your drivetrain and eleminate the movement in the diff under load. These really give then drivetrain a whole new life.


TRANSMISSION MOUNT
$95 shipped – (Within USA, International available upon request, contact me.)

Stock replacement transmission mount. This fits the stock 5 speed trans and cross member. REQUIRES slight modification to work with the auto trans (mounting holes must be elongated)


FRONT SWAY BAR BUSHINGS
$42 shipped – (Within USA, International available upon request, contact me.)

Stock replacement sway bar bushings. The old rubber ones are usually soaked in fluids and soft. These will reduce the slop in the sway bars and hold up the to the elements better.

REAR SWAY BAR BUSHINGS
$42 shipped – (Within USA, International available upon request, contact me.)

Stock replacement sway bar bushings. The old rubber ones are usually soaked in fluids and soft. These will reduce the slop in the sway bars and hold up the to the elements better.


TORQUE TUBE MOUNTS
$48 shipped – (Within USA, International available upon request, contact me.)

Replace the old rubber mount. The rubber dries up and shrinks which allows your torque tube to flex more. This will stiffen up the driveline and create less stress on the whole system. (MUST reuse the metal plates and spacers from the stock mounts)


SHORT THROW SHIFTER
$225 shipped – (Within USA, International available upon request, contact me.)

Stock replacement short throw shifter. Works with the stock starion / conquest 5 speed. Reduces the throw between gear and gets rid of that gear box slop. Same geometry handle as the stock shifter. $100 dollar core required or send your core in first.

CORE REQUIRED

REAR SUSPENSION SET
$165 shipped – (Within USA, International available upon request, contact me.)

This kit covers ONLY the rear suspension. Subframe mounts, and all rear control arm bushings. (Must reuse some of the steel sleeves from stock bushings.)


FRONT SUSPENSION SET
$110 shipped – (Within USA, International available upon request, contact me.)

This covers ONLY the front suspension. Both front control arms and both front tension rods. (Must reuse steel sleeves from stock bushings)


CENTER LINK
$330 shipped – (Within USA, International available upon request, contact me.)

Stock replacement center link! (Or drag link as some call it ) Over the years the joints can become sloppy. Tighten up that steering with a new center link. $120 dollar core is required or send yours in first.

CORE REQUIRED

GAUGE OVERLAY PANEL
$80 shipped – (Within USA, International available upon request, contact me.)

Want to upgrade to aftermarket gauges? This panel fits into the factory location, uses the factory warning lights and allows you to add your own gauges. Large holes fit 3 3/8 gauges. Small holes fit 2 inch, 2-1/16, or 52mm gauges.


AC DELETE BRACKET
$20 shipped – (Within USA, International available upon request, contact me.)

This takes place of the bracket that the Air conditioning compressor bolts too. If you’ve removed the AC from your car you’ve realized that your alternator also bolts to that bracket. You can remove that whole bracket and add this for your alternator mount. Saves space and weight!


BRAKE / CLUTCH RESERVOIR KIT
$90 shipped – (Within USA, International available upon request, contact me.)

With this kit you can remove the remote mount brake and clutch fluid reservoir setup. This will really clean up the engine bay and simplify the look of OEM reservoir setup. Comes with everything you need for the conversion.


HVAC GAUGE POD
$35 shipped – (Within USA, International available upon request, contact me.)

This goes in the dash where your HVAC controls go. With this you can have 3 gauges in the center of your dash and they are angled toward the driver. This is a precision cut and bent piece of aluminum that fits snugly into the dash without any ugly hardware. There are 3 options to buy, you can get RAW aluminum, powder coated satin black, powder coated gloss black. Relocation of HVAC controls required. Most people move them down below the radio. Fits gauges sized at 2 inches, 2-1/16 inch, and 52mm!

Color options

OUTTASIGHT CUP HOLDERS
$60 shipped – (Within USA, International available upon request, contact me.)

Rugged, convenient, easy to install, and fits all years of Starquest front seats- left or right. Absolutely no modification of the vehicle is required to install these cup holders. Have your car ready for summer with a convenience item that it never came with, but looks like it could have – Outtasight cupholders. Get yours today!

Quantity

DRIVESHAFT ADAPTER WITH FLANGE
$200 shipped – (Within USA, International available upon request, contact me.)

These are custom machined to bolt up to the stock torque tube! The other side of the adapter accepts a 1350 or u-joint flange so you can upgrade to 1350 u-joints with a swap. This comes with the 1 adapter, 1 rear flange for your new custom drive shaft, 4 bolts for the flange side with pre-applied loctite, 4 studs and 4 nuts for the torque tube side, and a tube of loctite for those.


STEERING COUPLER REPLACEMENT
$145 shipped – (Within USA, International available upon request, contact me.)

Do you have a sloppy steering wheel? Too much play when trying to turn? This will fix your issues! This replaces the stock steering couplers that have become worn out over the last 30+years. Pair this with a new centerlink and make your steering feel like new again!

WIPER COWL WEATHER STRIP $45 shipped This replaced the weather stripping between your plastic cowl panels and your windshield. It’s best to remove your cowl panels and install the stripping that way. Be cautious when removing them, they can be brittle and break.


BOOST GAUGE VACUUM ADAPTER
$17 shipped – (Within USA, International available upon request, contact me.)

For mechanical boost gauges that use the nylon or copper line. Instead of cramming the nylon line into a vacuum hose and ziptie it like we all have, you can put this on the end of the nylon hose and plug it directly to a vacuum line without it leaking! Anytime you try to ziptie it inside of a rubber hose it will leak at some point down the road and can cause you issues. This solves any leaking connections. It goes from a compression fitting that fits 1/8 line to a barb fitting that will fit almost all standard vacuum lines. You only get the brass fitting and barbed end, no hoses or lines included.


FUEL FILLER HOSE
$25 shipped – (Within USA, International available upon request, contact me.)

This goes between your fuel filler neck and your fuel tank. If you’ve ever had to drop the tank you will have noticed how hard and brittle the stock one becomes. They are also known to crack and leak! If you plan to service your tank you’ll want to have this with you! Comes with 2 new clamps!


TAIL LIGHT GASKETS
$45 shipped – (Within USA, International available upon request, contact me.)

This replaces the old worn out gaskets that go between your tail light and the body! Over the last 30 years they have become old, brittle, and don’t keep the water out of your tail lights. This replacement is made from a water proof neoprene that will keep the water out!


DOOR SILL PANEL CLIPS
$17 shipped – (Within USA, International available upon request, contact me.)

These are custom 3D printed OEM replacement. You get 4 clips per purchase, that’s enough for one panel. These clips hold the plastic door sill panel down. The one you see when you open your door. Often times these clips get broken and the panel won’t stay down. These clips pop in and out easier without breaking!


DOOR PANEL RETAINER CLIPS
$25 shipped – (Within USA, International available upon request, contact me.)

These clips replace the broken plastic clips that hold your door panel on. When removing the door panel it’s not uncommon for the 30 year old plastic to break. These are custom 3D printed OEM style replacements. Modeled directly after the OEM clips. You get 10 clips PER PURCHASE. That’s enough for 1 whole door .


HEADLINER PANEL RETAINER CLIPS
$17 shipped – (Within USA, International available upon request, contact me.)

These are custom 3D printed OEM replacement. You get 4 clips per purchase, that’s enough for the whole panel.
These clips go across the back of the REAR headliner section (the leather piece in most cars) these clips get broken when you try to improperly remove the panel by prying it out. The correct way to remove the panel is to “bump” it toward the rear of the car. It slides off the clips, then the clips rotate 90 degrees and come right out. To reinstall, you put the clips into the panel, slide the front of the panel on the headliner the push up and snap the clips into the body.


86-87 DOOR JAM INFO STICKER
$8 shipped – (Within USA, International available upon request, contact me.)

Replacement for your old worn out door jam info sticker. This is for 1986-1987 model cars.


88-89 DOOR JAM INFO STICKER
$8 shipped – (Within USA, International available upon request, contact me.)

Replacement for your old worn out door jam info sticker. This is for 1988-1989 model cars.


LIMITED SLIP DOOR JAM STICKER
$8 shipped – (Within USA, International available upon request, contact me.)

Replacement for your old worn out limited slip sticker. This is for 1986-1989 model cars.


CONQUEST DECAL SET
$35 shipped – (Within USA, International available upon request, contact me.)

Replacement decals for the outside of your car. This kit includes the large conquest sticker that goes across the hatch, the import for Chrysler sticker that goes above it, both TSI stickers for the fenders, and the conquest sticker for the front header panel. The decals come with cut for easy alignment onto your car.

COLOR OF DECAL

KEYS TO HAPPINESS KEYCHAIN
$10 shipped – (Within USA, International available upon request, contact me.)


T- SHIRT
$25 shipped – (Within USA, International available upon request, contact me.)

Preshrunk 100% cotton shirts. The front logo is a small pocket size MKS motorsport logo.

SIZE REQUIRED

MKS MOTORSPORT STICKER
$2 each shipped
Approximate size is 5×1. All weather stickers.

COLOR

STICKER
$2 each
Approximate size is 4×2. All weather stickers

COLOR

THERMAL ZERO

Thermal Zero turbo blankets go above and beyond when it comes to heat tolerance and durability.  The inner layer of the turbo blanket can handle over 2500 degrees Fahrenheit of direct heat.  The blankets are made with high quality 1 inch thick 6 pound density ceramic insulation material.

LAVA Blanket – This lava material is actually different than what any other turbo blanket manufacturer uses in that it features an aluminum bonded layer on the inside of the extremely heavy duty and high quality pulverized lava rock fiber outer layer to further reflect the small amount of radiant heat which makes it through the ceramic layer. Have experienced 90% heat reduction. This is what I prefer and run on all my applications. It’s more durable, and better looking! BLACK Blanket – Construction is the same as the LAVA blankets except they have a silicone based outer shell. Have experienced 75% heat reduction.

T25 / T28 (STOCK STARION) TURBO HEAT INSULATION BLANKET, UNIVERSAL INTERNALLY WASTEGATED $85 – $135 shipped – (Within USA, International available upon request, contact me.)These will fit all stock frames 12a, 14b, 16g and most other internally gated turbos.

Color

T3 TURBO HEAT INSULATION BLANKET, UNIVERSAL EXTERNALLY WASTEGATED $85 – $135 shipped – (Within USA, International available upon request, contact me.)These will fit almost all EXTERNALLY wastegated T3 turbos. Will fit some smaller frame t4 turbos as well.

Color

T4 TURBO HEAT INSULATION BLANKET, UNIVERSAL EXTERNALLY WASTEGATED $95 – $145 shipped – (Within USA, International available upon request, contact me.)These will fit almost all EXTERNALLY wastegated T4 turbos.

Color

HIGH TEMPERATURE LAVA HEAT PROTECTIVE SHEATHING $18 – $35 shipped – (Within USA, International available upon request, contact me.)The sheathing is measured by the inside diameter! Available sizes 1/2″, 3/4″, 1″, 1.5″, 2″The lava sheathing is capable of handling extreme  heat because of its woven pulverized lava rock composition.  The sheathing itself can easily handle 3000°F radiant heat making it the most heat resistant and durable sheathing we offer. Thermal Zero protective LAVA Heat Sheathing can be used for a large variety of purposes.  Fuel lines, electrical wiring, oil lines and spark plug cables are just a few common uses. Our lava aluminized sheathing is made in 36 inch lengths and come in a variety of inside diameters.  The sheathing is made from a high grade pulverized lava rock mat with an aluminized internal layer. It is very flexible and can easily be cut down to the correct size. You can cut anywhere and the stitching will NOT unravel.

SIZE

HIGH TEMPERATURE ALUMINIZED HEAT PROTECTIVE SHEATHING $12 – $25 shipped – (Within USA, International available upon request, contact me.)The sheathing is measured by the inside diameter! Available sizes 1/2″, 3/4″, 1″, 1.5″, 2″The sheathing is made from vermiculite coated fiberglass mat with a bonded aluminum layer to reflect radiant heat.  It is very flexible and can easily be cut down to the correct size.  The sheath can handle radiant temperatures of up to 1000° Fahrenheit making it very versatile. Thermal Zero protective aluminized heat insulation sheathing can be used for a large variety of purposes.  Fuel lines, electrical wiring, oil lines and spark plug cables are just a few common uses. Our aluminized sheathing is made in 36-inch lengths and comes in a variety of inside diameters. You can cut anywhere and the stitching will NOT unravel.

SIZE

LAVA HEAT WRAP $30 – $45 shipped – (Within USA, International available upon request, contact me.)Withstands 1800°F direct / 2500°F intermittent heat, High performance heat retention with a carbon fiber look, Natural color will not fade. Lava high temperature heat wrap is designed and engineered to withstand the highest of temperatures. Lava wrap is manufactured from actual pulverized lava rock which is stranded into a fiber then woven into a highly durable and extremely heat resistant wrap.  Lava wrap is stronger and more reliable than fiberglass wraps and provides better thermal performance and durability. It will maintain flexibility even after being exposed to direct extreme temperatures. Available in 1 inch wide or 2 inch wide rolls! 2 inch wide wrap is great for covering large areas quickly and at a lower cost than having a custom blanket made.

SIZE

BLACK HEAT WRAP $17 – $30 shipped – (Within USA, International available upon request, contact me.)It is extremely flexible and the weave of this wrap is very tight.  This high temperature vermiculite coated fiberglass wrap is capable of handling 1000-1500° F direct heat.  Uses for this heat insulation wrap are endless but typical uses of this wrap include on manifolds, exhaust pipes, turbo down pipes, and up pipes. Can fade if you don’t apply high temp silicone spray after applying the wrap. Available in 1 inch wide or 2 inch wide rolls! 2 inch wide wrap is great for covering large areas quickly and at a lower cost than having a custom blanket made.

SIZE

TAN HEAT WRAP $15 – $24 shipped – (Within USA, International available upon request, contact me.)It is extremely flexible and the weave of this wrap is very tight.  This high temperature vermiculite coated fiberglass wrap is capable of handling 1000-1500° F direct heat.  Uses for this heat insulation wrap are endless but typical uses of this wrap include on manifolds, exhaust pipes, turbo down pipes, and up pipes. Available in 1 inch wide or 2 inch wide rolls! 2 inch wide wrap is great for covering large areas quickly and at a lower cost than having a custom blanket made.

SIZE

STAINLESS LOCKING ZIP TIES $18 shipped (10 pack) – (Within USA, International available upon request, contact me.)Perfect for securing Thermal Zero exhaust wrap and blanketing material to exhaust pipe or heat sources. For use where a high strength tie is needed. The positive locking system was designed to hold materials tights in extreme environments. Locking Stainless Steel Ties are notched much like a plastic zip tie which allows the tie to lock into place and never loosen. Stainless steel ties have thousands of other uses from bundling wires, hoses, or securing any other type of insulation products where heat is a problem for a plastic tie.  Our ties are made from high-grade stainless steel which will not rust and corrode over time.  Our stainless ties are very easy to use.  Just insert the end of the tie into the locking mechanism and pull tight.


Gallery

You can check out the full SUPER STREET article.

You can check out the full Speedhunters article.

You can check out the full DSPORT article.

You can check out the full Haltech article.

You can check out the full Haltech Hero of the Year 2018 article.

ThatDudeinBlue review

SpooledUP.TV review