Intank Billet Fuel Pump Hanger Assembly
Intank Billet Fuel Pump Hanger Assembly
$235.00
Out of stock
Out of stock
Out of stock
This hanger will allow you to put a fuel pump inside the tank instead of the factory inline setup. There are several benefits with an intank setup, it allows the fuel pump to run cooler than an external, and reduces noise the stock style pump can create. With this you can use a Walbro 255, Walbro 450 E85 capable, Walbro 525 hellcat fuel pump also E85 capable. You will need to purchase a new pump as the stock style will no longer work.It comes with new hardware, new seal, and the vent fitting.
You will need fittings for your fuel lines. The fuel pump feed is -8ORB (-8AN O-ring boss). The fuel pump return is -6ORB (-6AN O-ring boss). You can add fittings in the drop down below or you can source your own.
If you choose to run the Walbro 450 or Walbro 525 pump you will need to add a relay for the fuel pump. These pumps will draw more amps than the factory one. You will need at least a 30amp relay which you can add in the drop down below, or you can source your own.
ADD ONS
Add a GENUINE HIGH PRESSURE 450LPH fuel Pump with install kit F90000274 $145 Shipped
Click Here : -> Walbro 450 Fuel Pump
There are 2 styles of the 450, there is the universal regular 450LPH pump and there is the High Pressure version. This is the high pressure version, it will run up to 112psi as the other will only run to 85psi.
Pump Specifications
Walbro Part Number: F90000274
Type: Universal E85 Intank Fuel Pump
Fuel: FLEX (E85 Ethanol Safe)
Horsepower: 750HP+
Flow Rate: 450LPH
Operating Pressure: 35-112 PSI
Add -6AN fuel feed fitting and -6AN fuel return fitting $25 shipped
Click Here : -> Fuel Fittings
This will give you the fittings needed for the top of the hanger. This will give you the 2 fittings needed to adapt a -6AN hose to the top of the hanger, this is just the 2 fittings for the top! Thats -6AN for the fuel feed and -6AN for the fuel return
Add -8AN fuel feed fitting and -6AN fuel return fitting $25 Shipped
Click Here : -> Fuel Fittings
This will give you the fittings needed for the top of the hanger. This will give you the 2 fittings needed to adapt a -6AN and -8AN hose to the top of the hanger, this is just the 2 fittings for the top! Thats -8AN for the fuel feed and -6AN for the fuel return
Add Relay Kit 30 AMP $40 shipped
Click Here : -> Relay Kit 30 AMP
This will give you a 30AMP relay kit with enough wire to reach the engine bay of your car, along with an inline 30amp fuse. It is recommended to put the relay closer to the pump so somewhere in the trunk area, and be sure to use a good ground.
5 reviews for Intank Billet Fuel Pump Hanger Assembly
This hanger will allow you to put a fuel pump inside the tank instead of the factory inline setup. There are several benefits with an intank setup, it allows the fuel pump to run cooler than an external, and reduces noise the stock style pump can create. With this you can use a Walbro 255, Walbro 450 E85 capable, Walbro 525 hellcat fuel pump also E85 capable. You will need to purchase a new pump as the stock style will no longer work.It comes with new hardware, new seal, and the vent fitting.
You will need fittings for your fuel lines. The fuel pump feed is -8ORB (-8AN O-ring boss). The fuel pump return is -6ORB (-6AN O-ring boss). You can add fittings in the drop down below or you can source your own.
If you choose to run the Walbro 450 or Walbro 525 pump you will need to add a relay for the fuel pump. These pumps will draw more amps than the factory one. You will need at least a 30amp relay which you can add in the drop down below, or you can source your own.
ADD ONS
Add a GENUINE HIGH PRESSURE 450LPH fuel Pump with install kit F90000274 $145 Shipped
Click Here : -> Walbro 450 Fuel Pump
There are 2 styles of the 450, there is the universal regular 450LPH pump and there is the High Pressure version. This is the high pressure version, it will run up to 112psi as the other will only run to 85psi.
Pump Specifications
Walbro Part Number: F90000274
Type: Universal E85 Intank Fuel Pump
Fuel: FLEX (E85 Ethanol Safe)
Horsepower: 750HP+
Flow Rate: 450LPH
Operating Pressure: 35-112 PSI
Add -6AN fuel feed fitting and -6AN fuel return fitting $25 shipped
Click Here : -> Fuel Fittings
This will give you the fittings needed for the top of the hanger. This will give you the 2 fittings needed to adapt a -6AN hose to the top of the hanger, this is just the 2 fittings for the top! Thats -6AN for the fuel feed and -6AN for the fuel return
Add -8AN fuel feed fitting and -6AN fuel return fitting $25 Shipped
Click Here : -> Fuel Fittings
This will give you the fittings needed for the top of the hanger. This will give you the 2 fittings needed to adapt a -6AN and -8AN hose to the top of the hanger, this is just the 2 fittings for the top! Thats -8AN for the fuel feed and -6AN for the fuel return
Add Relay Kit 30 AMP $40 shipped
Click Here : -> Relay Kit 30 AMP
This will give you a 30AMP relay kit with enough wire to reach the engine bay of your car, along with an inline 30amp fuse. It is recommended to put the relay closer to the pump so somewhere in the trunk area, and be sure to use a good ground.
5 reviews for Intank Billet Fuel Pump Hanger Assembly
-
Rated 5 out of 5
Robert Page (verified owner) –
-
Rated 5 out of 5
Al D. (verified owner) –
Excellent work, excellent service, excellent product!!! Prompt delivery, amazing communication and such personalised service, thanks Mikie your work and effort is definitely appreciated!
-
Rated 5 out of 5
Jesse –
Excellent part that fit perfectly. As always, fast delivery with great care to pack and ship so the part doesn’t have any issues in transit. Would definitely recommend.
-
Rated 5 out of 5
Emery G. (verified owner) –
-
Rated 5 out of 5
Jose C. (verified owner) –
Love the hanger and love that it got shipped to me in Puerto Rico. Took me 30mins swap the pick-up with the hanger, a little shimmy is needed but straight forward.
Robert Page (verified owner) –
Al D. (verified owner) –
Excellent work, excellent service, excellent product!!! Prompt delivery, amazing communication and such personalised service, thanks Mikie your work and effort is definitely appreciated!
Jesse –
Excellent part that fit perfectly. As always, fast delivery with great care to pack and ship so the part doesn’t have any issues in transit. Would definitely recommend.
Emery G. (verified owner) –
Jose C. (verified owner) –
Love the hanger and love that it got shipped to me in Puerto Rico. Took me 30mins swap the pick-up with the hanger, a little shimmy is needed but straight forward.